DDR3L-RAM P/C 4/1600 KINGSTON (KVR16LN11/4)

Kingston

เปรียบเทียบ

1,290฿

This document describes ValueRAM’s 512M x 64-bit (4GB) DDR3L-1600 CL11 SDRAM (Synchronous DRAM), 1Rx8, low voltage, memory module, based on eight 512M x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR3-1600 timing of 11-11-11 at 1.35V or 1.5V. This 240-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:

FEATURES
• JEDEC standard 1.35V (1.28V ~ 1.45V) and 1.5V (1.425V ~1.575V) Power Supply
• VDDQ = 1.35V (1.28V ~ 1.45V) and 1.5V (1.425V ~ 1.575V)
• 800MHz fCK for 1600Mb/sec/pin
• 8 independent internal bank
• Programmable CAS Latency: 11, 10, 9, 8, 7, 6
• Programmable Additive Latency: 0, CL – 2, or CL – 1 clock
• 8-bit pre-fetch
• Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]
• Bi-directional Differential Data Strobe
• Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)
• On Die Termination using ODT pin
• Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C
• Asynchronous Reset
• PCB Height: 0.740” (18.75mm) or 1.180” (30.00mm)

 

อ้างอิงจาก : https://www.kingston.com/

หมวดหมู่:
Brands

Model

4 GB ( 4GBx1 ) DDR3L/1600 Kingston Value Memory (KVR16LN11/4)

Type

DDR3

Capacity

4 GB

RAM Bus

1600 MHz

CL Timing

11-11-11

Warranty

L-T

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “DDR3L-RAM P/C 4/1600 KINGSTON (KVR16LN11/4)”

There are no reviews yet.